Introduction
The Bluetooth GPS Data Logger is a unique, user friendly Wireless interface for vehicle tracking device. Bluetooth GPS Data Logger uses the Global Positioning System (GPS)o record vehicle movement, speed, route and duration of stops. This information can be displayed on a GIS mapping with MapInfo formatted while downloading data to PC. So user can view vehicle's activity in precise detail.
Download Bluetooth GPS Data Logger Presentation
Download GPS Receiver Software Presentation
Key Features
Specifications
General
Accuracy
NEMERIX GPS Module
Position
Frequency
L1, 1575.42MHz
3meters CEP (50%), without SA (Horizontal) 7 meters (90%)
C/A Code
1.023MHz chip rate
0.1 m/sec. without SA
Channels
16 CH all in view tracking
Time
±100 ns synchronized to GPS time
Internal Antenna
Built-in low noise
Datum
I/O
External antenna port MMCX
WGS-84 (or by demanded)
Mini.USB 1.1/2.0( 12Mb)
Sensitivity
Audio Output
Speaker: 1Watt / 8 ohm
To – 152 dBm
LED:
bluetooth, GPS, power status
Dynamic Conditions
Altitude
<18,000m
Acquisition Rate
Velocity
<515m/sec
Cold Start
45 sec, average
Acceleration
<4g
Warm Start
35 sec, average
Motional Jerk
20 m/sec.
Hot Start
5 sec, average
Interface
Reacquisition
1 sec, average
Communication Protocol
Power
Communicate with host platform via
Built-in rechargeable 1100 mAh Li-ion battery
Bluethooth (class 2) serial port profile
5 V DC input
Bluetooth communication distance 10 M. TYP.
Operation Current
45 mAh (Typical)
GPS Protocol
Operation Time
22 hrs, fully charged
NMEA-0183 (V3.01) – GGA(1), GSA(3),
3 hrs. (Typical)
GSV(3), RMC(1),VTG(1), Baud rate 38400 bps,
Environmental
Data bit: 8, stop bit : 1(Default) *
Operating Temperature
- 20 ℃ to + 60 ℃
* (1):1sec output 1msg , (3): 3sec output 1msg
Relative Humidity
5% to 90% non-condensing
Device Size
Accessories
Dimension: 76 (L) X 46 (W) X 20 (H) mm
Car charger (12V in, 5V output)
Weight: 50g (without battery)
AC adaptor (5.3V output, 500ma)